Aero Radio Control

-----======= ALIGN T-Rex 600 ESP =======-----

This is my Heli Flagship.

arrived 20/04/2009 - celebrating over 1 year of flight without incident!

The Flagship of the fleet!

Specifications:

Full Length 45.67" (1160mm)
Total Height 15.57" (400mm)
Main Rotor Dia Std. 53.15"(1350mm)
Tail Rotor Dia 9.45" (240mm)
Gear Ratio 1:12.14:4.5/1:11.33:4.5
Full Equipped Weight 5.4 lbs (3300g)
ESC Align 100A
Brushless Motor Align 650L
Gyro Spartan 760
Tail Servo Futaba S9254
CCPM Servos Turnigy Cyclic Brushless BLS950
Receiver Spektrum AR7000
Battery FlightMax 6S 30C 5000mAh
go to PARTS Links

Flightmax ZIPPY Power from HobbyKing.  Buy them cheap here Hobby King

Spartan Gyro upgrade - simply the best I've had. Buy them cheap here Hobby King

Turnigy Brushless Servo upgrade on Cyclic - aka MKS Servos

Turnigy Servo

Bags for the 600

600 size Heli carrying bag made of 620D Polyester.
-holds 600 Class helis with Blades and Canopy.
-Water resistant PVC coating on back
-9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection.
-Extra wide front opening , convenience to drop in heli without removing blades and canopy.
-“Tail Boom” Zipper for even easier access to the Heli/Bag
-Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting
-Zipper coverage for extra protection against dust/water
Dimensions LxWxH: 1400x250x500mm for up to 600 size


PARTS for T-Rex 600:

Take Off & Land PERTH

Oriental Asia International RC

---======---

page updated 12-May-2010

back to BLIS ARC