Aero Radio Control
Aero Radio Control
Hughes MD500e
Scale 450 Heli Project
Take a
T-Rex 450 Clone and build it into this scale fuselage.
Buy the fuselage here.
|
Specifications: |
|
| Full Length of Fuselage | 685mm |
| Full Width of Fuselage | 265mm |
| Total Height | 327mm |
| Main Rotor Dia | 728mm |
| Tail Rotor Dia | 156mm |
| Gear Ratio | 1:10:4.4 |
| Full Equipped Weight | 995g |
| ESC | Turnigy Plush 25A |
| Brushless Motor | KD KA450H |
| Gyro | Futaba GY401 |
| Tail Servo | HD Power 2216MG |
| CCPM Servos | HXT-900 |
| Receiver | Spektrum AR6100E |
| source Replacement Fuselage | |
The rear mount is impossible to access so I zip tied it down.
The front mount was bolted down.
The tail secured with some EPP Foam.
Maiden Flight - tail fin not fitted as yet. 980grams AUW.
No vibration so far, who's a happy camper?
Tail fitted, how will it fly now?
Cool looking CF tail blades caused a bad tail fin vibration, so have gone back to the original nylon blades. All is finished.
One sweet chopper!
---======---
page updated 12-May-2010
back to BLIS ARC